GPD掌机官方论坛

讨论GPD系列掌机 XD Q9 Q89 G7 XD等

Log in

I forgot my password

Top posting users this month

Top posting users this week

Who is online?

In total there are 4 users online :: 0 Registered, 0 Hidden and 4 Guests

None


[ View the whole list ]


Most users ever online was 166 on 2016-10-25, 11:39

The most tagged members


    Touchscreen problem

    Share

    exorio

    帖子数 : 6
    注册日期 : 2016-10-25

    Touchscreen problem

    Post by exorio on 2016-11-26, 12:35

    Hei guys, I'll go straight to the point :

    So because of the game crashes on the graphics ("programs blocked from accessing graphics hardware" error) I went resetting my GPD Win Windows hoping that it would make it better, reinstall all the drivers from the official driver pack release, everything is working, except the touchscreen was all over the place.

    I'm trying to find goodix driver (touchscreen, firmware probably in this case), but this driver is reaaaaallly hard to find.

    Kendy replied to me by email, and it's included within the driver pack :

    https://mega.nz/#F!JUATALLT!PZv98emj5e2rvtCHE0JlHA

    After all the drivers installed, the device recognized my touch from every point on the screen... BUT... mostly they're registered off-screen.

    And when I touch the right side, it registered on the left side of the screen and vice versa. Calibrating using Windows' default calibration tool don't work.

    Sometimes even 2 cursors appeared while I only use one finger to touch the screen.

    So for the last resort I've downloaded the firmware :
    https://mega.nz/#F!NcBVQBDA!FK2jal9K57DU5LzRnPDJAQ

    Installed it, got the welcome options like when I received my GPD Win.

    But it doesn't respond to my touch (probably because the cursor was off-screen). So I fill up everything, but then after I'm in Windows, the touchscreen still behave the same.

    What I did previously before doing a full reset :

    Updated all the drivers (I figure maybe not just the graphics driver that caused this) using softwares like Advanced Driver Updater and Auslogic Driver Updater. But it turns out a mess, and it doesn't solve the graphic hardware crashes on games.

    Updated the bios from your previous update on IndieGogo (seems that you've removed the link) :
    https://mega.nz/#F!kdZnxIQI!HBreDSkh0dkxjsbxJH5m2Q

    Sending you back my GPD isn't an option, because the custom fees are so damn expensive I might as well wait for GPD Win 2 for that kind of cost (almost the same price as GPD Win itself).

    Any idea on how should I proceed from here?

    Perhaps you can provide me with what type of Goodix chipset/controller used in GPD Win? Even better, can you provide me with the firmware itself you guys are using, since I suspect I probably accidentally messed up with the touchscreen firmware, because of the driver updater softwares.

    The hardware was fine when I received them (except for graphics hardware crashes on games), touchscreen works correctly, so I suppose this isn't hardware issue. Only after I reset my Windows.

    Thank you.



    Karen_zhou

    帖子数 : 47
    注册日期 : 2016-11-22

    Re: Touchscreen problem

    Post by Karen_zhou on 2016-11-28, 04:38

    exorio wrote:Hei guys, I'll go straight to the point :

    So because of the game crashes on the graphics ("programs blocked from accessing graphics hardware" error) I went resetting my GPD Win Windows hoping that it would make it better, reinstall all the drivers from the official driver pack release, everything is working, except the touchscreen was all over the place.

    I'm trying to find goodix driver (touchscreen, firmware probably in this case), but this driver is reaaaaallly hard to find.

    Kendy replied to me by email, and it's included within the driver pack :

    https://mega.nz/#F!JUATALLT!PZv98emj5e2rvtCHE0JlHA

    After all the drivers installed, the device recognized my touch from every point on the screen... BUT... mostly they're registered off-screen.

    And when I touch the right side, it registered on the left side of the screen and vice versa. Calibrating using Windows' default calibration tool don't work.

    Sometimes even 2 cursors appeared while I only use one finger to touch the screen.

    So for the last resort I've downloaded the firmware :
    https://mega.nz/#F!NcBVQBDA!FK2jal9K57DU5LzRnPDJAQ

    Installed it, got the welcome options like when I received my GPD Win.

    But it doesn't respond to my touch (probably because the cursor was off-screen). So I fill up everything, but then after I'm in Windows, the touchscreen still behave the same.

    What I did previously before doing a full reset :

    Updated all the drivers (I figure maybe not just the graphics driver that caused this) using softwares like Advanced Driver Updater and Auslogic Driver Updater. But it turns out a mess, and it doesn't solve the graphic hardware crashes on games.

    Updated the bios from your previous update on IndieGogo (seems that you've removed the link) :
    https://mega.nz/#F!kdZnxIQI!HBreDSkh0dkxjsbxJH5m2Q

    Sending you back my GPD isn't an option, because the custom fees are so damn expensive I might as well wait for GPD Win 2 for that kind of cost (almost the same price as GPD Win itself).

    Any idea on how should I proceed from here?

    Perhaps you can provide me with what type of Goodix chipset/controller used in GPD Win? Even better, can you provide me with the firmware itself you guys are using, since I suspect I probably accidentally messed up with the touchscreen firmware, because of the driver updater softwares.

    The hardware was fine when I received them (except for graphics hardware crashes on games), touchscreen works correctly, so I suppose this isn't hardware issue. Only after I reset my Windows.

    Thank you.





    Sorry for the issue. It has been confirmed that if it appears "Graphic hardware has stopped responce,already been recovered", or "programs blocked from accessing graphics hardware",
    it is because the lack of voltage of CPU Stitch. Please send your product back to us to repair.

    However, if you think the repair price is too high, please purchase the components here: https://www.aliexpress.com/store/product/The-components-and-auxiliary-materials-we-can-provide/1281164_32770371841.html?spm=2114.8147860.0.0.7td3O9
    and go to a local store around you to repir it accourding to the manual in the aliexpress website.

    We hope this can solve your issue.

    exorio

    帖子数 : 6
    注册日期 : 2016-10-25

    Re: Touchscreen problem

    Post by exorio on 2016-11-28, 08:22

    Karen_zhou wrote:
    exorio wrote:Hei guys, I'll go straight to the point :

    So because of the game crashes on the graphics ("programs blocked from accessing graphics hardware" error) I went resetting my GPD Win Windows hoping that it would make it better, reinstall all the drivers from the official driver pack release, everything is working, except the touchscreen was all over the place.

    I'm trying to find goodix driver (touchscreen, firmware probably in this case), but this driver is reaaaaallly hard to find.

    Kendy replied to me by email, and it's included within the driver pack :

    https://mega.nz/#F!JUATALLT!PZv98emj5e2rvtCHE0JlHA

    After all the drivers installed, the device recognized my touch from every point on the screen... BUT... mostly they're registered off-screen.

    And when I touch the right side, it registered on the left side of the screen and vice versa. Calibrating using Windows' default calibration tool don't work.

    Sometimes even 2 cursors appeared while I only use one finger to touch the screen.

    So for the last resort I've downloaded the firmware :
    https://mega.nz/#F!NcBVQBDA!FK2jal9K57DU5LzRnPDJAQ

    Installed it, got the welcome options like when I received my GPD Win.

    But it doesn't respond to my touch (probably because the cursor was off-screen). So I fill up everything, but then after I'm in Windows, the touchscreen still behave the same.

    What I did previously before doing a full reset :

    Updated all the drivers (I figure maybe not just the graphics driver that caused this) using softwares like Advanced Driver Updater and Auslogic Driver Updater. But it turns out a mess, and it doesn't solve the graphic hardware crashes on games.

    Updated the bios from your previous update on IndieGogo (seems that you've removed the link) :
    https://mega.nz/#F!kdZnxIQI!HBreDSkh0dkxjsbxJH5m2Q

    Sending you back my GPD isn't an option, because the custom fees are so damn expensive I might as well wait for GPD Win 2 for that kind of cost (almost the same price as GPD Win itself).

    Any idea on how should I proceed from here?

    Perhaps you can provide me with what type of Goodix chipset/controller used in GPD Win? Even better, can you provide me with the firmware itself you guys are using, since I suspect I probably accidentally messed up with the touchscreen firmware, because of the driver updater softwares.

    The hardware was fine when I received them (except for graphics hardware crashes on games), touchscreen works correctly, so I suppose this isn't hardware issue. Only after I reset my Windows.

    Thank you.





    Sorry for the issue. It has been confirmed that if it appears "Graphic hardware has stopped responce,already been recovered", or "programs blocked from accessing graphics hardware",
    it is because the lack of voltage of CPU Stitch. Please send your product back to us to repair.

    However, if you think the repair price is too high, please purchase the components here: https://www.aliexpress.com/store/product/The-components-and-auxiliary-materials-we-can-provide/1281164_32770371841.html?spm=2114.8147860.0.0.7td3O9
    and go to a local store around you to repir it accourding to the manual in the aliexpress website.

    We hope this can solve your issue.

    Hey Karen,

    Now I got 2 issues.

    I've tried everything for the touchscreen error on the software side (firmware, drivers, etc, none worked).

    So for the touchscreen, I've ordered the touchscreen panel from Aliexpress. That's all I can afford for now.

    And about the fix graphic crashes, is it confirmed and fully tested that this will fix the problem?

    Thank you.

    Karen_zhou

    帖子数 : 47
    注册日期 : 2016-11-22

    Re: Touchscreen problem

    Post by Karen_zhou on 2016-12-06, 03:47

    exorio wrote:
    Karen_zhou wrote:
    exorio wrote:Hei guys, I'll go straight to the point :

    So because of the game crashes on the graphics ("programs blocked from accessing graphics hardware" error) I went resetting my GPD Win Windows hoping that it would make it better, reinstall all the drivers from the official driver pack release, everything is working, except the touchscreen was all over the place.

    I'm trying to find goodix driver (touchscreen, firmware probably in this case), but this driver is reaaaaallly hard to find.

    Kendy replied to me by email, and it's included within the driver pack :

    https://mega.nz/#F!JUATALLT!PZv98emj5e2rvtCHE0JlHA

    After all the drivers installed, the device recognized my touch from every point on the screen... BUT... mostly they're registered off-screen.

    And when I touch the right side, it registered on the left side of the screen and vice versa. Calibrating using Windows' default calibration tool don't work.

    Sometimes even 2 cursors appeared while I only use one finger to touch the screen.

    So for the last resort I've downloaded the firmware :
    https://mega.nz/#F!NcBVQBDA!FK2jal9K57DU5LzRnPDJAQ

    Installed it, got the welcome options like when I received my GPD Win.

    But it doesn't respond to my touch (probably because the cursor was off-screen). So I fill up everything, but then after I'm in Windows, the touchscreen still behave the same.

    What I did previously before doing a full reset :

    Updated all the drivers (I figure maybe not just the graphics driver that caused this) using softwares like Advanced Driver Updater and Auslogic Driver Updater. But it turns out a mess, and it doesn't solve the graphic hardware crashes on games.

    Updated the bios from your previous update on IndieGogo (seems that you've removed the link) :
    https://mega.nz/#F!kdZnxIQI!HBreDSkh0dkxjsbxJH5m2Q

    Sending you back my GPD isn't an option, because the custom fees are so damn expensive I might as well wait for GPD Win 2 for that kind of cost (almost the same price as GPD Win itself).

    Any idea on how should I proceed from here?

    Perhaps you can provide me with what type of Goodix chipset/controller used in GPD Win? Even better, can you provide me with the firmware itself you guys are using, since I suspect I probably accidentally messed up with the touchscreen firmware, because of the driver updater softwares.

    The hardware was fine when I received them (except for graphics hardware crashes on games), touchscreen works correctly, so I suppose this isn't hardware issue. Only after I reset my Windows.

    Thank you.





    Sorry for the issue. It has been confirmed that if it appears "Graphic hardware has stopped responce,already been recovered", or "programs blocked from accessing graphics hardware",
    it is because the lack of voltage of CPU Stitch. Please send your product back to us to repair.

    However, if you think the repair price is too high, please purchase the components here: https://www.aliexpress.com/store/product/The-components-and-auxiliary-materials-we-can-provide/1281164_32770371841.html?spm=2114.8147860.0.0.7td3O9
    and go to a local store around you to repir it accourding to the manual in the aliexpress website.

    We hope this can solve your issue.

    Hey Karen,

    Now I got 2 issues.

    I've tried everything for the touchscreen error on the software side (firmware, drivers, etc, none worked).

    So for the touchscreen, I've ordered the touchscreen panel from Aliexpress. That's all I can afford for now.

    And about the fix graphic crashes, is it confirmed and fully tested that this will fix the problem?

    Thank you.


    Sorry for the issue. Please send an email to kendyzhu777@softwincn.com. Please put "repair machine (your pledge ID + your country)" as the email subject, and attach your indigogo order screenshot and the problem of your GPD WIN. We will try to reply to you soon.

    exorio

    帖子数 : 6
    注册日期 : 2016-10-25

    Re: Touchscreen problem

    Post by exorio on 2016-12-17, 17:16

    Hi Karen, received my new screen yesterday, installed it on my GPD, touchscreen working well again.

    So I'm positive the firmware was busted. It's my fault.

    Anyway great job on the device. Couldn't be more happier than this.

    Sponsored content

    Re: Touchscreen problem

    Post by Sponsored content


      Current date/time is 2017-05-29, 07:47